TL-6.5 Line Preamplifier Data Specifications
| Vacuum Tube Complement: | 2 x 12AU7 |
| Inputs: |
3 pairs balanced/XLR or RCA single-ended 5 pairs single-ended/RCA |
| Outputs: |
1 pair balanced out 2 pairs single-ended RCA out 2 pairs single-ended RCA buffered Tape Out |
| Remote control functions: |
Power Source Select Volume up/down Mute Fade Balance Control Phase Reverse |
| Gain | 14 dB single ended, 20dB balanced |
| Output Impedance: | 30 Ohms (Max 200 ohms at 10Hz) |
| Input Impedance : | 50K Ohms (20k ohms min) |
|
Frequency response +0-1 dB: |
1 Hz - 100KHz (20Hz – 100kHz +0–1dB into 600 ohms with 900pf 20’ interconnect cable) |
| Maximum Output Voltage < 1% THD: | 31 Volts 10Hz – 200kHz into 600 ohms at 1%THD |
| Channel Separation: | > 100 dB @ 1KHz (>80 dB @ 20kHz) |
| THD+N | Less than 0.05% at 10V out |
| Rise and fall times | 3µsecs |
| Noise floor | Better than –100dB un-weighted |
| Power Consumption: | 50 Watts |
| Dimensions (W x D X H): |
17.5 x 17.5 x 6 inches 44.5 x 44.5 x 15.3 cm |
| Weight: | 55 lbs (40Kg) Fully packed |
Detailed Information TL-6.5 Line Stage Preamplifier
